Abrasion Wet Wheel Tracking Equipment Leakage Test Standard
IEC60112 7 Inch Touch Screen Control
Introduction:
The tracking index tester is in accordance with GB4207, IEC60112
standards. It is suitable for lighting, low voltage electrical
equipment, household appliances, electrical machines, motors, power
tools, electronic equipment , electrical instruments. It also
applies for insulation, plastic, electrical connectors, accessories
industry.
Method for the determination of the proof and the comparative
tracking indices of solid insulating materials. It is simple,
accurate, reliable, and practical features.
Principle:
On the surface of solid insulating material, between two platinum
electrode(2mm*5mm), a voltage is applied, and Timing (30s) set
height (35mm) conductive liquid droplet volume dropping the
provisions of (0.1% NH 4 CL ), to evaluate the solid insulating
material surface leakage resistance performance under wet or
contaminated medium electric and combined effects measured for
comparative tracking index (CT1) and resistance to tracking index
(PT1).
5201A electric leakage mark tester
Model:5201A
Accord with standard:GB4207 IEC60112
Technology Data:
1.) controller:7 inch programmable controller
2.) electrical pressure display:digital voltmeter
3.) electrical current display:digital current meter
4.) dimensions:1120w*600d*1020h
5.) inner volume: ≥0.5cubic
6.) electrode material:platinum
7.) electrode size:2*5*35mm
8.) electrode pressure:1.00N
9.) electrode distance:4.0mm
10.) drop volume:50 drop/1cubic meter
11.) drop height:35mm (can be adjustable)
12.) drop time:30s+-0.1(can be setted)
13.) drop number:1~9999(can be setted)
14.) test voltage:50v~600v(can be adjustable)
15.) power supply voltage drop:1.0A+-0.1A<8%
16.) mark judgment:0.5A+-0.05A
Features:
1.) 7 inch touch screen control system
2.) digital display voltmeter
3.) digital display current meter
4.) imported micro drop pump
5.) liquid drop time and volume control precision
6.) test qualifid ,inqualified judgment function
7.) door open/close protect system
8.) overvoltage protect system
9.) full operation protect system
10.) tempered glass window
Main configure:
1.) standard electrode *1
2.) imported micro pump *1
3.) explosion prevent tempered glass *2
4.) standard liquid *1
5.) standard ruler *1
| dimensions | 1120w*600d*1020h
|
| inner volume | ≥0.5cubic |
| electrode distance | 4.0mm |
| test voltage | 50v~600v |
